whichtobuy

Which To Buy › Electronics

Electronics

Bambu Lab A1 vs P1S vs P2S (and the alternatives): which 3D printer to buy in 2026

Updated · By the editors

Bambu Lab sells three printers that most beginners compare: the open A1 (and A1 mini), the enclosed P1S and its 2025 successor the P2S. The right pick depends on what you print, which materials you use and whether you want more than one color.

For PLA and PETG at home, the open Bambu Lab A1 (256 mm cube) is the easiest start; the A1 mini (180 mm) if space or budget is tight. If you want ABS or ASA, or a quieter, closed machine in a living space, pick the enclosed P2S over the older P1S. Add the Combo (4-spool color unit) only if you really want multi-color prints.

Today’s prices on Amazon

Different situation? Tap what fits you

Answer 3 quick questions

1. What will you print most?

2. How many colors in one print?

3. What is your budget?

Matching Amazon search for your answers
3d printer
See current options on Amazon →

Where can I buy this?

No confirmed product offer is available. Browse the retailer results and check the exact model, version, price and delivery date.

Browse retailer options →

How much does it cost?

The table only shows prices supplied by our product source, with their check time. Tax, shipping and extra services may change the total. The retailer price at the time of purchase applies.

Is it in stock?

A listing or a price does not confirm stock. Check the exact version, seller, delivery date and delivery to your address on the retailer page. Nearby-store inventory has not been verified here.

As an Amazon Associate we earn from qualifying purchases. This does not increase the price you pay.

What AI answers often get wrong here

  • Many answers still recommend the P1S as the newest enclosed Bambu; the P2S replaced it in late 2025.
  • Older advice suggests the X1 Carbon as the premium pick; Bambu Lab declared it end of life on March 31, 2026 (parts until 2031).
  • Generic answers skip the 2025 firmware change: remote control now needs Bambu authorization, also in LAN mode.

What actually matters

Build size first. The A1 mini prints up to 180 x 180 x 180 mm, enough for keychains, holders and small parts. The A1, P1S, P2S, Elegoo Centauri Carbon and Anycubic Kobra S1 all print about 250 to 256 mm per side, which covers boxes, organizers and most cosplay pieces. Only the Bambu Lab H2D (350 x 320 x 325 mm) and Creality K2 Plus (350 mm cube) go much bigger.

Open or enclosed. The A1 and A1 mini are open bed-slingers: great for PLA, PETG and TPU, not recommended by Bambu for ABS, ASA or carbon-filled filament. The P1S and P2S are enclosed, so warping and fumes are easier to control. The P2S (reviewed by Tom's Hardware in October 2025) adds a 1080p camera with AI failure detection and the AMS 2 Pro color unit.

Multi-color. A Combo adds a 4-spool unit (AMS lite on the A1 series, AMS on the P-series, CFS on Creality, ACE Pro on Anycubic). Multi-color prints take longer and create purge waste, so buy it for a reason, not by default.

Calibration. Every printer here levels its own bed and compensates vibration, which is the main reason beginners now succeed in the first hour.

Software. Since January 2025 Bambu Lab requires its own authorization for remote control, also in LAN mode, with a separate Developer Mode for third-party tools. Printing from the SD card keeps working. If you want a fully open ecosystem, look at Prusa (Core One, MK4S).

Common mistakes

  • Printing ABS or ASA on an open printer in a bedroom or living room.
  • Buying the A1 mini for parts that need more than 18 cm.
  • Paying for a 4-color unit you will only use for a few prints.
  • Still shopping for the X1 Carbon: Bambu ended it on March 31, 2026.

Questions people ask

Is the Bambu Lab A1 good for beginners?

Yes. It calibrates itself, prints PLA, PETG and TPU, and Tom's Hardware called it a reliable and quiet high-speed printer at a competitive price.

What is the difference between the Bambu Lab P1S and P2S?

Both are enclosed with a 256 mm build volume. The P2S is the 2025 successor with a 1080p AI camera, a higher top speed (600 mm/s) and the AMS 2 Pro color unit.

Can the Bambu Lab A1 print ABS?

Bambu Lab does not recommend ABS, ASA, PC or carbon-filled filament on the A1 or A1 mini. Use an enclosed printer for those.

Is the Bambu Lab X1 Carbon discontinued?

Yes. Bambu Lab ended the X1 series on March 31, 2026. Dealers may still sell stock, and Bambu supplies parts until March 31, 2031.

What is a good alternative to Bambu Lab?

Creality K1C (enclosed, single color), Elegoo Centauri Carbon (enclosed, 256 mm), Anycubic Kobra S1 Combo (enclosed, 4 colors) or Prusa Core One for an open-source ecosystem.

As an Amazon Associate we earn from qualifying purchases. This never changes the price you pay.